Finally got the clear drawers printed so the unit is now complete. 20 drawers, 8 have dividers, the rest don’t. #3DPrinting #MKMModelwerx

The heat has me working so slowly recently, but I’ve finally wired up the LEDs in the first of Atlantis’ piers. Once I’ve got all 6 done I can begin painting them and the buildings. #Stargate #Atlantis #3DPrinting #ScsleModels #ModelBuilder #MKMModelwerx

All the parts for the #Andorian #Kumari have been printed. Second pic shows comparison with the #Eaglemoss model. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #ModelBuilder #MKMModelwerx

My model base kits are now available on my ko-fi shop.

https://ko-fi.com/mkm_modelwerx/shop

#ScaleModels #ModelBuilder #ModelBuilding #3DPrinting #MKMModelwerx

For those without a 3D printer, I’ve also listed a physical Micro Set and Sol holder for sale on my Ko-fi shop. #ScaleModels #ScaleModelling #ModelBuilder #MKMModelwerx

https://ko-fi.com/s/191c7c0906

I created a Micro Set and Micro Sol decal solution bottle holder with spaces for brushes. The 3D print file is available on my Ko-fi shop. #ScaleModels #ScaleModelling #ModelBuilder #3DPrinting #MKMModelwerx

https://ko-fi.com/s/1d380015f8

The shipping boxes and labels arrived for the model bases. Here’s what they’ll look like. #StarTrekModels #SciFiModels #ScaleModels #ModelBuilding #ModelBuilder #MKMModelwerx

The temperature has finally come down enough that I can get some painting done. I’ve applied the first colour to #Destiny. The camera flash makes it look more copper than it is. #Stargate #ScaleModels #3DPrinting #MKMModelwerx

Here’s the base (with a 5mm tube) holding my unfinished 1/1400 scale Romulan Valdore. #StarTrek #MKMModelwerx

Here it is! The base kit I’m hoping to sell.

Measures 12cm x 12cm x 3cm and includes:

Base bottom
Base lid
Pin to plug the hole behind the stand (if wiring your model via the tube)
Tool to push the lid out from the bottom part
2.1 x 5.5mm power connector
Mini rocker switch
15cm Metal tube (either 4, 5 or 6mm diameter)

£22 GBP plus tracked shipping. Will ship worldwide.

Available for preorder here: https://ko-fi.com/mkm_modelwerx/shop

#MKMModelwerx

Base design has been finalised and is now printing. I'm planning on printing a lot of these and hopefully people will be interested in buying them. Details coming soon! #3DPrinting #MKMModelwerx

Prototype for a model base I designed. Doesn’t require any glue and has holes for a power connector and mini rocker switch. Wires can either be fed through the metal tube or out behind the tube to an external connector so the model can come off the base. #3DPrinting #MKMModelwerx

Got started on the #Sagan class with the assembly of the nacelle pylons. #StarTrek #StarTrekModels #SciFiModels #SaganClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx

Another quick build from the 3D printer. The 29th century combadge. #3DPrinting #3DPrint #StarTrek #Voyager #MKMModelwerx

All of the #Atlantis parts have now been printed and I did a test fit of all the pieces. #Stargate #StargateAtlantis #Atlantis #ScaleModels #3DPrinting #3DPrint #MKMModelwerx

Printed the first 4 towers during the night. #Stargate #StargateAtlantis #Atlantis #ScaleModels #3DPrinting #MKMModelwerx

Finally have all of #Atlantis’ piers printed plus the lower half of the central tower. Total diameter is 65cm (25 inches). Just need to print all the buildings now. #Stargate #StargateAtlantis #ScaleModels #3DPrinting #MKMModelwerx

Final engine part is printed and in place. I’ve got 6 more parts to print to finish the remaining piers then all I have to do is print the buildings and towers. #Stargate #StargateAtlantis #ScaleModels #3DPrinting #MKMModelwerx

Got another two sections of #Atlantis printed last night. #Stargate #StargateAtlantis #ScaleModels #3DPrinting #MKMModelwerx

Printing of the city of #Atlantis is well underway. This is going to take a while. I’ve included a 40cm ruler at the bottom for scale. #Stargate #StargateAtlantis #ScaleModels #3DPrinting #MKMModelwerx